QINGDAO AORUI PLASTIC MACHINERY CO.,LTD1
QINGDAO AORUI PLASTIC MACHINERY CO.,LTD what we undertake is clients's trust rather than the extruder machine .Our service has no terminal but only starting point.
Add to Cart
PP/PE Plastic Pipe Extrusion Line , Single Screw PP/PE Twin Pipe Extruder
Quick Detail:
1. First class pipe die was designed with many years experience
2. Perfect twin pipe vacuum sizing systerm
3. Controlled independently umlitary structure twin pipe hauling mechanism and synchronous cutting device.
4. Optional length set and accurate adaption stacker
Specifications:
1. The gearbox:New-style project of parallel three-axises driving makes the convey axis,convey chain,decelerate and the torque assignment get together,which keeo it compact,and the key bearings are imported. Soakage and coerce lubrication integrate smoothly.When the hydraulic circuit is over pressed, it alarms.
2. The Screw Barrel : Euro-style rectangle barrel,reflux refrigeration is optimized and disposed,which makes temperature difference in C areas smaller . According to the material and special techinics demands,the material of cylinder can use high quality nitrided steel,corrosion proof or antifriction with corresponding process
3. The PP/PE Twin Pipe Extrusion Machine Including : Feeding systerm-Single screw extruder-Special designed mould-Vacuum sizing water tank-Water cooled tank-Haul off machine-Stacker-Control systerm.
4. There is advantage as following by using separate type screw and groove barrel toghter:
its optimized during meterial melting process.thus get more extrusion throughput.
it is realized extruding melt material in low temperature.
Cutting dunction is caused through separate clearance and it makes material equal well.
it's controlled during melt plasticization process. therefore only granules that smaller than seperate clearance can enter melt channel.
Technical parameters of PP/PE Twin Pipe Extruder:
| Extruder Model | SJSZ-51X105 | SJSZ-65X132 |
| Accessory Machine | GFDP-63 | GFDP-63 |
| Pipe Diameter | 16-63mm | 16-63mm |
| Production Speed | 12m/min | 12m/min |
| Max.Output | 160kg/h | 220kg/h |
Application:
The PP/PE Twin Pipe Extrusion Production Line mainly used to convey the middle pressure or corrosive gas and liquid .
Competitive advantages:
1. We have more than 15 years experience in plasticextrusion machine.
2. Our engineers can go to aborad to install the machine , if customer need, our engineers can trainning the local worker how to use and maintain the machine.
3. we are factory , customer can visit to see the machine and test the machine.
4. Fast delivery time , only need 30days after receive the payment.
